Fluffy Foot Pouffe

The measurements for the following pouffe are as follows
20 inches (50cm)in diameter for the top
sides are 12 inches (30cm)wide by 60 inches(150cm) around

Using the pattern place on material and cut out the circle. The surround piece will need a join to meet required length.

Cut both rectangles out and join them to fit around the pouffe. Pin the top circle to the side length using pins and securely sew it around the circle. Join the sides to the top. You can pull out any fur that gets caught up in the stitches later.

Using some cotton fabric cut another circle out the same size as your top piece. Cut this circle in half and hem each straight line.

Pin and sew this into the sides as you did the top, leaving enough space to be able to fill it with heavy toy filling.

Turn it all right side out and stuff with filling.

Like this project? Then share it on Facebook!

Leave your comment on this project (no HTML and keep comments to 255 characters or less). While a rating is required, an actual comment is optional.

Rate this project (Click on a star) (Required):

  Check this box to be notified when new comments are added to this project