Diaper bag

Cut out 2 18 inch squares of fabric and of the interfacing.

Cut out 2, 4 inch wide by 25 inch strips. Do this with the interfacing also. But leave about a 5 inch hole at the bottom. You will use this later to turn the bag.

The straps need to be sewn. There are two ways to do this. You can iron a quarter inch seam on both sides then fold in half and iron again. Then sew up the side. or you can make a tube and turn it. I recommend the first one. It's so much easier.
Then turn the outside of the bag and interfacing with the right sides on the outside.(the way it's going to look when it's finished)

Then slip the lining over the outside fabric. But this is going to be turned inside out. You will see the seams. Sew around the top. Now turn the bag, thru the opening you left in the lining. Then sew the hole up. When it's turned right, you will need to put a seam along the top about a quarter inch down. This makes a much cleaner line and more professional look.

  

This project was submitted by love2dressgaudy (CAREY BANKS). Thanks CAREY BANKS!

Leave your comment on this project (no HTML and keep comments to 255 characters or less). While a rating is required, an actual comment is optional.

Rate this project (Click on a star) (Required):

  Check this box to be notified when new comments are added to this project